DR. ONKAR SINGH

 
Research Activities :
Sl. No. Project Funded by Duration
1. ‘Study on methods of improving the performance of combined gas & steam turbine plants’ All India Council for Technical Education, Government of India Three years
2. ‘Experimental investigations on transpiration cooling for gas turbine blades’ SERC, Deptt. of Science & Technology, Government of India under SERC Fast Track Proposal Three years
3. ‘Real time integrity monitoring of composite materials using magnetostrictive (MS) materials’ All India Council for Technical Education, Government of India Two years
4. ‘Performance evaluation and life cycle analysis of Biodiesel from low value industrial by-products’ All India Council for Technical Education, Government of India Two Years
5. ‘Development of Diffusion Absorption Cycle Based Solar Water Cooler and Refrigerator’ Council of Science & Technology, U.P. Two Years
6. ‘Modernization of Advanced Manufacturing Science Laboratory’ All India Council for Technical Education, Government of India Two Years
7. Life Cycle Analysis of Biodiesel Fuels University Grants Commission, New Delhi Three Years
8. Investigations on failure of Gas turbine blades All India Council for Technical Education, Government of India Two Years
9. Development of low capacity and cost-effective air conditioner Council of Science & Technology, U.P. Two Years
 
Research Guidance :
  • Guided 28 B. Tech. Projects
  • Guided 23 M. Tech. Dissertations.
  • Guided 13 Ph.D.
  • Presently Guiding 04 Ph. D. students

Topics of the Ph.D. supervised Name of Student

  • Thermodynamic analysis of combined cycle gas/steam cycle and co- generation plants SANJAY, 2005, UPTU, Lucknow
  • Thermodynamic analysis of steam injected gas turbine and combined gas/steam cycle JAGDISH PRASAD YADAV, 2006, UPTU, Lucknow
  • Analysis and design of methodologies for software quality/reliability measures RAGHURA SINGH, 2006, AKTU, Lucknow
  • Design and Analysis of Air Engine BHARAT RAJ SINGH, 2011, GBTU, Lucknow
  • Development, characterization and performance evaluation of biodiesel PRAVIN KUMAR SINGH, 2012, GBTU, Lucknow
  • Comparative evaluation of CI engine performance and life cycle analysis for Jatropha, Karanja and Neem biodiesel fuels - ASHOK YADAV, 2012, GBTU, Lucknow
  • Investigation into transpiration cooling of gas turbine blades used in gas/steam combined cycle power plants SANJAY KUMAR, 2013, GBTU, Lucknow
  • Thermodynamic analysis and optimization of heat recovery steam generator (HRSG) for gas/steam combined cycle MEETA SHARMA, 2015, AKTU, Lucknow
  • Modeling adaptive control of layer hardening of steel beams subjected to electromagnetic induction - MOHAN KRISHNA MISRA, 2016, AKTU, Lucknow
  • Thermodynamic analysis of gas/steam combined cycle with different means of inlet air cooling - ANOOP KUMAR SHUKLA, 2017, AKTU, Lucknow
  • Investigations on CI engine performance, emission and its limitation using biodiesels from Jatropha, Mahua and Neem oils in Indian conditions MUKESH KUMAR, 2018, UTU, Dehradun
  • Thermodynamic analysis of combined power cycle with ammonia water mixture for power generation- MAYANK MAHESHWARI, 2019, AKTU, Lucknow
  • Thermodynamic analysis on solar diffusion absorption system KISHAN PAL SINGH, October 2019, AKTU, Lucknow

Topics of the M.Tech. supervised Name of Student

  • Computer aided design of heat recovery steam generators, Rajeev Kumar, SR No. 731/00, 2002, M.Tech.-CAD, HBTI, Kanpur
  • Computer aided design of vapour compression system and its optimization using genetic algorithm, Girish Kumar Verma, May 2003, M.Tech.-CAD, HBTI, Kanpur
  • Development of software for computer aided design of centrifugal pump “PUMPCAD” and its’ optimization using genetic algorithm, Sanjay Kumar, Dec 2003, M.Tech.- CAD, HBTI, Kanpur
  • Design and manufacturing of yoke, Ram Kumar Tyagi, SR No. 702/01, Dec 2003, M.Tech.-CAD, HBTI, Kanpur
  • Modelling and structural analysis of propellant tank for a space launch vehicle, Ramendra Singh Niranjan, SR No. 702/03, 2005, M.Tech.-CAD, HBTI, Kanpur
  • Computer simulation of thermodynamic analysis of film cooled of gas turbine blade, Anoop Kumar Shukla, SR No. 719/09, Jan, 2012, M.Tech.- CAD, HBTI, Kanpur
  • Simulation studies of flow over gas turbine blade, Mragank Bajpai, SR No. 801/08, Jan 2012, M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
  • Computer Aided Analysis of Vane Type Air Turbine, Kunwar Sandip, SR No. 702/08, Feb, 2011, M.Tech.- CAD, HBTI, Kanpur
  • Development of software for life cycle analysis of jatropha biodiesel, Naveen Kumar Singh, SR No. 736/08, Feb, 2011, M.Tech.- CAD, HBTI, Kanpur
  • Exergy analysis of steam injected gas turbine, Jayant Singh, SR No. 735/10, Oct,2012, M.Tech.- CAD, HBTI, Kanpur
  • Investigation on performance improvement of diesel engine by use of biodiesel, Manish Kumar Pandey, SR No. 801/10, Sep, 2013, M.Tech.- Mechanical Engg. Design, HBTI, Kanpur
  • Modelling and analysis of integrated coal gasification combined cycle, Atul Rai, SR No. 807/05, May, 2012, M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
  • Thermodynamic analysis of Kalina cycle, Mayank Maheshwari, SR No. 811/10, Sep 2013
  • M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
  • Computer aided life cycle analysis of biofuel, Sandeep Singh, SR No.725/11, Nov, 2013
  • M.Tech.- CAD, HBTI, Kanpur
  • Computer aided thermodynamic analysis of gas turbine cycle for performance improvement through inlet air cooling, Priyanka Chaturvedi, SR No. 730/11, Nov, 2013, M.Tech.- CAD, HBTI, Kanpur
  • Computer aided design and analysis of casing of medium capacity electrical motor, Ankur Srivastava, SR No. 723/11, Oct, 2013, M.Tech.- CAD, HBTI, Kanpur
  • Fabrication and simulation of diffusion absorption refrigeration system, Kalyan Singh, Jan 2012, M.Tech.- CAD, HBTI, Kanpur
  • Base line energy audit at m/s Llyods Steel Industries Limited, Wardha a case study, Sudhir Kumar Bajpai, 2012, M.Tech.-Mechanical Engineering, Gautam Budha Technical University, Lucknow
  • Computer Simulation of Solar Integrated Combined Power Cycle for Carbon
  • Free Power and Heating Jatin Sachdeva, 2018, HBTU, Kanpur, M.Tech.- CAD
  • Computer Simulation of Solar Oxide Fuel Cell-Gas Turbine Organic Rankine Cycle Combined System Ragini Singh, 2018, HBTU, Kanpur, M.Tech.-CAD
  • Computer Simulation for Exergy Analysis of SOFC-GT Combined Power and Cooling Cycle Pranjal Kumar, 2019, HBTU, Kanpur, M.Tech.-CAD
  • Computer Simulation for Exergy Analysis of Solarized Combined Power and Cooling Cycle Gaitry Arora, 2019, HBTU, Kanpur, M.Tech.-CAD
  • Computer simulation for thermodynamic analysis of gas/steam combined cycle power plants with carbon capture and storage Divya Prakash, 2019, HBTU, Kanpur, M.Tech.-CAD
Collaborative Projects  :

  • “Design and Development of Lightweight Motorised Wheel Chair” in collaboration with Artificial Limbs Manufacturing Corporation Ltd.,Kanpur, 2008-09. Completed
  • “Development of Solar powered tricycle for handicapped” in collaboration with Artificial Limbs Manufacturing Corporation Ltd., Kanpur. Completed

 
 

 
 
 
1